
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 145-155 mm usable travel window, allowing you to trim the nominal 155 mm stroke by up to 10 mm during commissioning without adding external stops.
This model uses a 16 mm carbon steel rod with an M12x1.25 thread, paired with PT tapered port threads (G1/8 port size) and 30 mm air cushions at both ends. The integrated magnet supports AirTAC CMSE reed and DMSE electronic sensors. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 145-155 mm window during machine setup to perfect part seating without swapping cylinders.
Quickly adjust the stroke by up to 10 mm on the line when switching to a slightly different product size, minimizing downtime.
Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end-of-stroke position in automated clamping stations.
Select this 40 mm bore when an application requires precise end-position tuning on the fly, such as during product changeovers, rather than relying on a fixed-stroke SAI cylinder. If your setup needs less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; stepping up to a 50 mm bore provides 982 N. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder for pneumatic locking.
For a direct ISO 15552 replacement, match the 40 mm bore, 155 mm stroke, 10 mm adjustment, PT port threads, and the -S magnet option. Because the stroke is 155 mm, side loads are moderate, but always ensure proper external guiding if the load is heavy or off-center.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 155 mm down to 145 mm. It only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.