
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 135-155 mm usable travel window by allowing you to trim the nominal 155 mm stroke back by up to 20 mm.
This -S variant includes a magnet for position sensing with AirTAC CMSE reed or DMSE electronic solid-state switches. The extruded aluminum barrel provides sensor grooves on both sides for flexible mounting. Remember the rear adjuster acts only as a travel stop for end-position tuning, not a lock to hold loads without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 135-155 mm end-stop during machine commissioning without swapping cylinders or adding external stopper blocks.
Quickly adjust the travel window on automated lines to accommodate minor variations in incoming product sizes.
If your application requires less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa. The adjustable rear screw prevents the need to swap cylinders for minor product changeovers. For load-holding without live air, select the SAIL or BSAI series instead.
To match this ISO 15552 replacement, specify: 40 mm bore, 155 mm stroke, 20 mm adjustment, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 155 mm stroke is under 300 mm, side-load risks are minimal, but always ensure proper rod alignment to prevent premature seal wear.
Quick checklist
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from 155 mm down to a minimum of 135 mm. It sets the retract end-position for fine-tuning but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.