
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 125-155 mm usable travel window, allowing you to dial back the 155 mm nominal stroke by up to 30 mm during commissioning.
This model features a carbon steel piston rod with an M12x1.25 thread and a PT tapered G1/4 port. The extruded aluminum barrel includes sensor grooves on both sides, supporting CMSE reed or DMSE electronic switches if a magnet is added later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact end-of-stroke position within the 125-155 mm window during initial machine commissioning without disassembling the cylinder.
Quickly adapt a packaging line for different product sizes by dialing the stroke back up to 30 mm, eliminating the need to swap out the entire cylinder.
Set precise retract stops for material push-off or forming operations where the exact material length requires slight mechanical adjustment.
The 30 mm adjustment range is ideal for product changeovers, letting you fine-tune the end position without swapping cylinders or adding external stops. The rear adjuster acts as a travel stop and deceleration point, not a lock; it will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
For ISO 15552 replacement, match the 40 mm bore, 155 mm stroke, PT G1/4 port, and your preferred mounting bracket. Since the 155 mm stroke is under 300 mm, side-load stress is moderate, but the 16 mm rod still handles off-center loads better than smaller bores. For long unsupported travels, always use an external guide.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that trims the effective travel back by up to 30 mm, creating a 125-155 mm usable window. It sets the end position and deceleration but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.