
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 115 to 155 mm, allowing you to dial back the nominal 155 mm stroke by up to 40 mm during commissioning.
The carbon steel rod with an M12x1.25 thread handles moderate side loads, while the extruded aluminum barrel incorporates sensor grooves on both sides. You can mount standard AirTAC CMSE reed or DMSE electronic sensors if position feedback is needed later. This adjustable configuration omits the FB, CA, CB, and CR mounts, utilizing a reduced interface set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reposition the retract end-stop within the 115-155 mm window to accommodate varying package sizes on a packaging line without replacing the actuator.
Fine-tune the exact retract distance during machine setup to perfect a pressing or clamping operation, absorbing mechanical tolerance variations on the fly.
Dial back the ejection stroke by up to 40 mm to prevent overtravel and damage when ejecting delicate parts from a molding or machining fixture.
The 40 mm adjustment range is ideal for product-size changeovers on a conveyor line, letting operators fine-tune the retract end-position without swapping out the entire cylinder or adding external physical stops.
Remember that the rear adjuster acts purely as a travel stop and does not function as a mechanical lock. The cylinder cannot hold a load or maintain position without live air pressure. For true fail-safe load holding, consider the related SAIL pneumatic lock or BSAI clamp-lock series instead. This model uses a PT tapered port thread and operates at speeds between 30 and 800 mm/s.
Quick checklist
A rear external screw acts as a mechanical stop, allowing you to shorten the effective travel from the 155 mm nominal stroke down to a minimum of 115 mm. This provides a 40 mm adjustable window for fine-tuning the retract end-position at commissioning.
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf of thrust.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.