
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops.
This variant includes a magnet for position sensing and uses a standard carbon steel rod with PT tapered ports. The rear adjuster acts purely as a travel stop to set the retract position and does not hold the load without live air. It retains standard variable air cushions at both ends and utilizes the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 105-155mm stroke window when switching product sizes on a packaging line, using the rear screw to set new end positions without mechanical rework.
Fine-tune the retract distance during machine setup to achieve exact positioning, leveraging the 50mm adjustment range to perfect the end-stop.
Sort or divert items on a conveyor by adjusting the actuator's travel limit on the fly to accommodate different package dimensions.
If your application requires less force, the 32mm bore provides 402N; if you need more power, stepping up to the 50mm bore yields 982N. The adjustable stroke is perfect for product changeovers or dialing in a precise end-stop, whereas a fixed SAI cylinder is better for rigid, unchanging positions.
Because the nominal stroke is 155mm, an external guide is recommended if the load is heavy or asymmetric. To replace an ISO 15552 cylinder, match the 40mm bore, 155mm stroke, 50mm adjustment, PT port thread, and the -S magnet. For load-holding without live air pressure, this cylinder is insufficient as the adjuster is not a lock; consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 50mm. This gives the 155mm nominal stroke a usable travel window of 105-155mm, which can be fine-tuned during commissioning without adding external stops.
At 0.7 MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.