
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 155 mm stroke that can be dialed back by up to 75 mm, giving operators an expansive 80 to 155 mm usable travel window for precise end-position tuning during commissioning.
This unit includes a -S magnet for position sensing and is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches that mount directly into the dual-side sensor grooves on the extruded aluminum barrel. It uses a PT tapered port and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical stop to set the retract end-position and must not be confused with a locking mechanism, as it cannot hold loads without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-155 mm travel window during format changes without removing the cylinder from the machine or adding external stopper blocks.
Fine-tune the retract end-stop at commissioning to perfect the seating distance of a 40 mm bore assembly tool without mechanical shims.
Vary the ejection length on the fly for different part sizes, relying on the 16 mm carbon steel rod to handle mid-range ejection forces.
If your fixture needs less force, stepping down to a 32 mm bore yields 402 N; if you need more clamping power, stepping up to a 50 mm bore provides 982 N. The 75 mm adjustment range is ideal for product-size changeovers on a line, allowing you to alter the effective stroke without physically swapping the cylinder or adding external stops.
For an exact ISO 15552 dimensional replacement, match the 40 mm bore, 155 mm nominal stroke, PT tapered port, and the -S magnet option. Note that SAIJ uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets. Because the nominal stroke is 155 mm, side loads are minimal, but long unsupported strokes should always use an external guide. If your process requires true load-holding without live air, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the retract stroke. For this model, you can trim the 155 mm nominal stroke back by up to 75 mm, providing a usable travel window of 80 to 155 mm. It sets the end position but does not lock the load without live air.
At its maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.