
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X165-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, allowing you to fine-tune the end position without adding external stops. With a nominal 165 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 155-165 mm to perfectly dial in machine stops during commissioning.
This model uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered port threads on its G1/4 connection. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE solid-state switches if a magnet is added later. The rear adjuster functions strictly as a travel stop for deceleration and positioning, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 155-165 mm retraction point during machine setup to compensate for mechanical wear or sensor drift without machining new spacers.
Quickly adjust the effective stroke by up to 10 mm when switching between slightly different product sizes on the same production line.
The adjustable 155-165 mm travel window is ideal for product changeovers where exact end-of-stroke positioning varies slightly, saving the cost of swapping a fixed-stroke SAI cylinder. For holding loads safely without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is not a locking mechanism. When matching an ISO 15552 replacement, verify the 165 mm stroke, 10 mm adjuster, G1/4 port, PT thread, and standard carbon rod.
Quick checklist
If you increase the operating pressure to 0.7 MPa, the push force rises to 879 N.
The rear adjuster acts as a mechanical stopper that lets you shorten the effective stroke from 165 mm down to 155 mm. This allows for fine-tuning the end position during commissioning without swapping the cylinder, though it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.