
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X165-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be dialed back by up to 100 mm, creating a wide 65-165 mm usable travel window. This allows you to fine-tune the retract end-position at commissioning without swapping out the entire actuator.
The rear adjustment screw acts purely as a mechanical stop to set the travel limit, working alongside the standard variable air cushions at both ends to decelerate the load. It is not a locking device and will not hold a load without live air pressure. For load-holding requirements without continuous air, consider an external pilot-operated check valve or explore AirTAC SAIL or BSAI series cylinders. This extruded aluminum profile cylinder includes sensor grooves on both sides for straightforward position feedback.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance instantly when switching between part sizes on a packaging line, utilizing the 100 mm adjustment range to avoid mechanical retooling.
Fine-tune the end-of-stroke position during machine setup to achieve precise alignment, using the rear stopper screw instead of adding external shims.
Sort or divert items of varying heights on a conveyor by adjusting the cylinder's effective travel window between 65 and 165 mm on the fly.
Choose this 40 mm bore when an application requires precise end-position tuning across varying product sizes, offering a 65-165 mm adjustable window rather than a fixed length. Conversely, if you need higher thrust, moving up to a 50 mm bore provides 982 N at the same pressure. Because the nominal stroke is 165 mm, an external guide is not strictly mandated, but ensuring the M12x1.25 rod thread is properly aligned will minimize side-load wear.
When specifying a replacement, verify the 40 mm bore, 165 mm nominal stroke, 100 mm adjustment range, PT port thread, and the required mounting style. SAIJ supports a reduced subset of ISO 15552 mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. As this configuration lacks the -S magnet suffix, it does not support AirTAC CMSE reed or DMSE electronic sensors without modification.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke from its 165 mm nominal length down to as little as 65 mm. This stopper sets the travel limit but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.