
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X165-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 145-165 mm usable travel window, letting you dial back the nominal 165 mm stroke by up to 20 mm during commissioning.
The carbon steel piston rod features an M12x1.25 thread, providing a robust interface that handles side loads better than smaller bores. This adjustable model retains the standard extruded aluminum barrel with sensor grooves on both sides, but omits the FB, CA, CB, and CR mounting accessories found on fixed-stroke variants, supporting only Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position within the 145-165 mm window during machine setup without physically remounting the actuator.
Quickly adjust the travel distance to accommodate varying product sizes on a single conveyor line.
The rear adjuster screw is ideal for fine-tuning end positions without swapping cylinders or adding external stops.
When matching an ISO 15552 replacement, verify the 165 mm stroke, 20 mm adjustment range, PT tapered port thread, and mounting style. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-stop holding, use an external rod lock or pilot-operated check valve.
Quick checklist
A rear stopper screw lets you mechanically shorten the 165 mm stroke by up to 20 mm, creating a 145-165 mm adjustable travel window. The adjuster sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.