verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke165 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30

The AirTAC SAIJ40X165-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 40mm bore and a 165mm nominal stroke that can be fine-tuned down by up to 30mm, creating a precise 135-165mm usable travel window.

This extruded aluminum profile cylinder includes sensor grooves on both sides and uses a standard PT tapered port thread. The rear stopper allows you to trim the retract end-position during commissioning without adding external stops. Note that the adjuster acts only as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X165-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30 Is Used

tune

Machine Changeovers

Dial in the 135-165mm retract distance during product size transitions without physically replacing the cylinder or adding external stopper blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the exact end-of-stroke position at commissioning to compensate for mechanical tolerances in your fixture alignment.

conveyor_belt

Variable End Stops

Adjust the rear stroke screw on the fly for sorting or diverting applications that require slightly different reach distances.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30 the Right Cylinder?

The adjustable 135-165mm window is ideal for product-size changeovers on a line, letting you dial in the exact retract distance on the fly instead of swapping out a fixed-stroke SAI cylinder.

For an exact ISO 15552 replacement, match the 40mm bore, 165mm stroke, 30mm adjustment, PT port thread, and your required mounting hardware. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Since this is a standard 165mm stroke under the 1200mm maximum, it ships as a regular configuration without needing external side-load guides.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30 FAQ

If you increase the pressure to 0.7 MPa, the push force rises to 879N.

The rear adjuster screw allows you to shorten the effective stroke by up to 30mm. This means the 165mm nominal stroke can be mechanically trimmed to any travel distance within a 135-165mm window. The adjuster acts as a physical stop and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X165-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.