
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X165-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
With a nominal 165mm stroke and a 40mm adjustment range, this SKU provides a usable travel window of 125-165mm. You can fine-tune the retract end position at commissioning without external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod with an M12x1.25 thread handles side loads well, though long unsupported strokes still need an external guide.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 125-165mm retract distance during product size changes without physically replacing the cylinder or adding external mechanical stops.
Fine-tune the exact end of stroke at commissioning to absorb mechanical tolerances, using the rear adjuster to set the precise 40mm trim window.
Provide adjustable retract positioning for diverter gates or pushers on a conveyor line, allowing operators to modify the travel endpoint on the fly.
The adjustable 125-165mm travel window is ideal for product changeovers on a line, allowing you to dial in the exact retract distance rather than swapping to a fixed-stroke SAI cylinder.
For ISO 15552 replacement matching, specify bore 40, stroke 165, 40mm adjustment, PT tapered port thread, and standard carbon steel rod without a magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external rod lock or the SAIL series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to shorten the effective stroke from its nominal 165mm down to 125mm. It acts as a mechanical stop to set the retract end position, but it is not a lock and will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.