
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X165-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X165-40-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, designed for applications requiring precise end-position tuning. It features a 40mm bore, a 165mm nominal stroke, and a 40mm adjustment range, creating a usable travel window of 125 to 165mm. This allows you to dial in the exact retract distance at commissioning without swapping out the entire unit.
Equipped with a standard carbon steel rod and a -S magnet, this cylinder supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side sensor grooves of its extruded aluminum barrel. The M12x1.25 rod thread and 16mm rod diameter provide robust resistance to side loading. The rear adjuster acts purely as a mechanical stop for deceleration and positioning; it does not lock or hold the load without continuous live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X165-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end-position during machine commissioning or product changeover, utilizing the 125-165mm travel window to avoid swapping cylinders.
Adjust the rear stopper to accommodate different package lengths on a packaging line, providing flexible end-position control without external hardware.
Dial in the exact stroke distance for varying workpiece sizes, using the 40mm adjustment range to adapt the end-stop on the fly.
Choose this 40mm bore adjustable-stroke cylinder when your machine setup requires variable end-stops or frequent product-size changeovers. The 40mm adjustment range is ideal for accommodating multiple part lengths on a single conveyor line without adding external stops. For any load-holding requirements without live air, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a brake.
When replacing an ISO 15552 cylinder, match the 40mm bore, 165mm stroke, 40mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 configurations. Because the 165mm stroke is under the 300mm threshold, side-loading is less critical, but an external guide is still recommended for optimal rod longevity.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 40mm. This creates a usable travel window of 125 to 165mm, letting you fine-tune the retract end-position at commissioning without replacing the cylinder.
At 0.9 MPa, the push force increases to 1130N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.