
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X170-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 160-170 mm usable travel window, allowing you to dial back the nominal 170 mm stroke by up to 10 mm during commissioning without swapping the cylinder or adding external stops.
This extruded aluminum profile barrel omits tie-rod construction and includes sensor grooves on both sides. It uses a standard PT tapered G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread, which together handle moderate side loads well. The mounting hardware is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, intentionally omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-170 mm travel distance during machine setup to perfect end-of-stroke positioning without machining external spacers.
Quickly shorten the cylinder's effective stroke by up to 10 mm on packaging lines when switching to a slightly smaller product format.
Provide a mechanical stop that operators can fine-tune on the factory floor for multi-tier assembly processes requiring precise 40 mm bore force.
The 10 mm rear adjuster is ideal for machinery that needs variable end-stops or fine-tuning during product changeover, functioning purely as a mechanical stop rather than a load-holding lock. Because the stroke is 170 mm, an external guide is not strictly mandated, but the 16 mm rod still requires support for any heavy offset loads.
To match this cylinder exactly for an ISO 15552 replacement, verify the 40 mm bore, 170 mm stroke, 10 mm adjustment range, PT G1/4 port, and the specific mounting accessory. Note that because no -S magnet is specified, it will not support AirTAC CMSE reed or DMSE electronic sensors without modification. For true load-holding without live air pressure, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
It operates at speeds ranging from 30 to 800 mm/s.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from 170 mm down to 160 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.