
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X170-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to shorten the effective travel. With a 170mm nominal stroke and a 100mm adjustment range, it provides a usable travel window of 70 to 170mm. This wide tuning flexibility is ideal for prototyping or accommodating multiple product sizes on a single line without swapping the cylinder.
The extruded aluminum barrel includes sensor grooves on both sides for easy switch placement. It uses a G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread, providing solid resistance to side loads, though long unsupported travel still requires external guiding.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position during commissioning or product changeovers without physically replacing the cylinder or adding external stops.
Adjust the travel window from 70 to 170mm on the fly to accommodate different part sizes on the same production line.
Fine-tune the retract end position to achieve precise pressing or clamping depth across multiple product variants.
Choose this 40mm bore when your application needs moderate force and significant on-the-fly stroke tuning. If you need less force, the 32mm bore provides 402N at 0.5MPa, but this 40mm model is better suited for heavier pushing. The 100mm adjustment screw lets you dial in the exact end position during commissioning without adding external stops.
Because this is an adjustable-stroke cylinder rather than a fixed SAI model, you gain flexibility for product changeovers. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. For ISO 15552 replacement matching, ensure your setup requires a 40mm bore, 170mm stroke, PT port, and mounting from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
At 0.9MPa, the push force increases to 1130N.
The rear adjuster screw allows you to trim the effective stroke by up to 100mm. This means the 170mm nominal stroke can be fine-tuned to any travel length between 70 and 170mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.