
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X170-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 170 mm travel that can be fine-tuned down by up to 20 mm, yielding a usable 150-170 mm end-position window.
This model incorporates a 16 mm carbon steel rod and an M12x1.25 rod thread, offering a robust interface for standard mechanical coupling. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed and DMSE electronic switches if a magnet is specified later. It uses a PT tapered port and provides adjustable air cushions at both ends to decelerate the payload smoothly.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-170 mm travel window during product size transitions without physically replacing the actuator or bolting on external stop blocks.
Fine-tune the retract position at commissioning to absorb mechanical tolerances in tooling, ensuring precise placement of the 16 mm rod.
Adjust the stroke on the fly for varying package sizes on a conveyor line, using the rear screw to set the exact push distance.
Select this adjustable SAIJ variant when a fixed-stroke SAI cylinder cannot accommodate minor mechanical tolerances or product changeovers. The rear stopper allows you to dial in the exact 150-170 mm travel without adding external stops or swapping the cylinder. If your application requires higher thrust, stepping up to the 50 mm bore yields 982 N at 0.5 MPa.
For ISO 15552 footprint replacements, match the 40 mm bore, 170 mm stroke, and 20 mm adjustment range, ensuring the PT port and mounting choice align. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR options. Remember that the rear adjuster functions strictly as a travel stop, not a load lock; for position holding without live air pressure, consider an external rod lock or related SAIL or BSAI models.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 170 mm down to 150 mm. It only sets the travel end and decelerates the load; it does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.