
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X170-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 170 mm nominal stroke that can be dialed back by up to 30 mm, giving you a precise 140-170 mm usable travel window for commissioning flexibility.
This extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, and uses a PT tapered port thread. The rear screw acts purely as a travel stop for end-position tuning and works alongside the standard air cushions to manage deceleration. It is not a locking mechanism, so live air pressure is required to hold the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 140-170 mm retract position during product size changes without physically replacing the cylinder or re-engineering fixed stops.
Fine-tune the final resting position of tooling at commissioning, using the rear screw to absorb minor mechanical discrepancies safely.
Adjust the stroke depth on the fly for pneumatic diverters handling differently sized packages on the same production line.
The integrated 30 mm adjuster is ideal for product changeovers, letting you shift the retract end-stop without adding external stops or swapping the cylinder for a fixed-stroke SAI variant.
To match this ISO 15552 footprint exactly, specify a 40 mm bore, 170 mm stroke, PT port thread, and your preferred mounting from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (note that FB, CA, CB, and CR mounts are omitted). Because this model lacks the -S magnet option, it will not work with CMSE or DMSE sensors. With a 170 mm stroke, the 16 mm carbon steel rod handles normal loads, but long unsupported strokes still require an external guide to prevent side-loading wear.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the 170 mm nominal stroke by up to 30 mm, creating a 140-170 mm travel window. It functions as a physical stop for end-position tuning and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.