verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke170 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40

The AirTAC SAIJ40X170-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 170 mm stroke that can be fine-tuned backward by up to 40 mm, creating a precise 130-170 mm usable travel window for commissioning.

This variant uses a standard carbon steel rod with PT tapered port threads (G1/4). The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Remember that the rear adjuster functions purely as a travel stop to decelerate the piston, not as a load-holding lock; maintaining position requires live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X170-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40 Is Used

tune

Variable End-Stop Tuning

Dial in the exact clamping distance between 130 and 170 mm during machine commissioning without replacing hardware.

conveyor_belt

Product Size Changeover

Quickly adapt a packaging line's rear reject stroke to handle different box lengths on the fly.

settings_input_component

Machine Setup Calibration

Use the 40 mm trim range to safely overshoot and dial back the end position during initial equipment assembly.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40 the Right Cylinder?

The adjustable 130-170 mm window is ideal for product changeovers on a line, allowing you to shift the end-stop without physically swapping the cylinder or adding external stops. For exact ISO 15552 replacement matching, verify the 170 mm stroke, 40 mm adjustment range, G1/4 PT port, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since this unit lacks a magnet, it cannot host CMSE or DMSE sensors without a -S upgrade.

Because the 170 mm stroke is relatively long, the 16 mm rod and M12x1.25 thread carry moderate side-load capacity, but you should still use an external guide rail for heavy radial loads. If your process requires true load-holding without continuous air pressure, step up to an AirTAC SAIL or BSAI cylinder instead of relying on the adjuster.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.

The rear external adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 170 mm down to 130 mm. It only sets the retract end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X170-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.