verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X170-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke170 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75

The AirTAC SAIJ40X170-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 170 mm stroke that can be fine-tuned backward by up to 75 mm, yielding a highly flexible 95 to 170 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, and the standard carbon steel rod handles robust daily operation.

This adjustable design allows precise end-position tuning during commissioning without swapping hardware or adding external stops. It uses a PT tapered port thread (G1/4) and supports a speed range of 30-800 mm/s. The rear adjuster acts strictly as a mechanical stop to set the travel end, meaning it will not hold a load without continuous live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X170-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75 Is Used

tune

Machine Changeover

Dial in the 95-170 mm travel window rapidly during product format changes without replacing the cylinder or bolting on external stops.

settings_input_component

Variable End-Stop Setup

Use the rear adjuster to set precise retract positions for multi-tier assembly stations, accommodating different part heights on the fly.

conveyor_belt

Diversion Gate Tuning

Fine-tune the actuation reach on sorting conveyors where package sizes vary, ensuring accurate physical contact without reprogramming.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75 the Right Cylinder?

Select this 40 mm bore cylinder when an application requires variable end-stops or frequent product-size changeovers on a line. Because the 170 mm stroke is below the 300 mm threshold, side-load stress is moderate, though external guides remain recommended for heavy lateral loads.

Choose the SAIJ over a fixed-stroke SAI when you need on-the-fly mechanical adjustments rather than a locked travel distance. For load-holding without live air pressure, this cylinder is insufficient since the adjuster is not a lock—consider the SAIL or BSAI series instead. To match this ISO 15552 replacement exactly, specify: 40 mm bore, 170 mm stroke, 75 mm adjustment, PT port, standard carbon steel rod, no magnet, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75 FAQ

The rear mechanical screw acts as a stopper, allowing you to shorten the effective stroke from its 170 mm nominal length by up to 75 mm. This creates a 95 to 170 mm travel window for fine-tuning end positions during setup.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X170-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X170-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.