verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X175-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke175 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20

The AirTAC SAIJ40X175-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 175 mm stroke that can be fine-tuned down by up to 20 mm, giving you a precise 155-175 mm usable travel window during commissioning.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch placement. It uses a standard carbon steel piston rod with an M12x1.25 thread and a PT G1/4 port. The rear adjuster acts purely as a mechanical stop to set the end position, meaning it will not hold the load dynamically without continuous air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X175-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20 Is Used

tune

Machine Changeover

Quickly adjust the 155-175 mm stroke end-position when switching between product sizes on a packaging line without changing hardware.

precision_manufacturing

End-Stop Tuning

Fine-tune the exact retraction point during initial commissioning to perfect tooling alignment and avoid hard mechanical crashes.

conveyor_belt

Variable Diverting

Actuate diverter gates at varying distances along a conveyor by dialing the rear screw to match specific package lengths.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20 the Right Cylinder?

The adjustable 155-175 mm window is ideal for product changeovers on a line, letting you dial in the exact end-stop without swapping the cylinder or adding external stops. For a fixed travel requirement, a standard SAI cylinder would suffice, but the SAIJ variant saves setup time on variable products.

When replacing an ISO 15552 cylinder, match the 40 mm bore, 175 mm stroke, 20 mm adjustment, PT G1/4 port, and your preferred mounting style. SAIJ supports a reduced set of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Since this unit lacks the -S magnet option, it cannot host CMSE or DMSE sensors. If your application requires load holding without live air, consider the SAIL or BSAI series instead of relying on the stopper.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw allows you to shorten the 175 mm nominal stroke by up to 20 mm, creating a 155-175 mm travel window. It functions as a mechanical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X175-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.