
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X175-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw, you can trim the nominal 175mm travel back by up to 30mm, creating a precise 145-175mm usable stroke window for exact end-position tuning.
This 40mm bore unit features a 16mm carbon steel rod with an M12x1.25 thread, paired with PT tapered ports for reliable pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, while the mounting options cover Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 145-175mm travel window during product size changes on a packaging line without replacing the cylinder.
Use the rear adjuster to fine-tune the exact retracted position during machine commissioning, eliminating the need for external mechanical stops.
Set precise retract distances for diverter arms or sorting gates where the exact end position shifts between production runs.
The 30mm adjustment range is ideal for machine setups requiring variable end-stops or product changeovers, allowing you to fine-tune the travel distance at commissioning without physically swapping the cylinder or adding external stops.
Because the rear adjuster acts strictly as a travel stop and the air cushions only manage deceleration, this cylinder cannot hold a load without continuous live air pressure. If your setup demands true load-holding, consider the SAIL or BSAI series. For a direct ISO 15552 replacement, match the 40mm bore, 175mm stroke, 30mm adjustment, PT ports, and the required mounting interface.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the 175mm nominal stroke by up to 30mm, giving you a usable travel window of 145-175mm to fine-tune the end position without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.