
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X175-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X175-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 135-175 mm, allowing you to dial back the 175 mm nominal stroke by up to 40 mm during commissioning.
This extruded aluminum profile barrel includes sensor grooves on both sides, though no magnet is installed on this configuration. The PT tapered port threads match the G1/4 air supply size for this bore. The rear stopper mechanism sets the end position without adding external stops, but it acts purely as a travel limiter and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance up to 40 mm when switching between product sizes on a packaging line.
Fine-tune the final position during machine commissioning without fabricating custom external stopper blocks.
Adjust the stroke window from 135 to 175 mm to perfectly position pneumatic routing gates for varying carton widths.
The 40 mm adjustment range is ideal for product-size changeovers on a conveyor line, letting you fine-tune the retract end-position without swapping hardware.
As an ISO 15552 dimensionally interchangeable cylinder, it uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. The carbon steel rod with an M12x1.25 thread handles moderate side loads well, but if your application requires position holding without live air, select a SAIL or BSAI series cylinder instead.
Quick checklist
A rear external screw acts as a mechanical stop, allowing you to shorten the effective travel from the 175 mm nominal stroke down to a minimum of 135 mm. This provides a 40 mm adjustment window for fine-tuning the end position without changing the cylinder.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.