
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X175-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X175-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This carbon-steel rod variant uses a PT tapered G1/4 port and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features sensor grooves on both sides, and the mounting set omits FB, CA, CB, and CR brackets, utilizing Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the stroke back by up to 50 mm during machine setup to accommodate a new product size without disassembling the line.
Fine-tune the retract travel window from 125 to 175 mm at commissioning to perfect the tooling alignment.
Establish a variable end-stop for pressing or clamping operations where the exact travel distance needs on-site adjustment.
Choose this 40mm bore when you need precise end-position tuning during commissioning or product changeover without swapping the entire cylinder or adding external stops. If your application requires less force, stepping down to a 32mm bore yields 402N at 0.5 MPa, while heavier loads might need the 50mm bore at 982N.
The rear adjuster acts strictly as a travel stop to set deceleration, not as a locking device. It will not hold a load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series. To match this ISO 15552 replacement exactly, specify the 40mm bore, 175mm stroke, 50mm adjustment, PT port, and the -S magnet.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the effective travel from the 175mm nominal stroke down to 125mm. This stopper sets the travel end and deceleration point, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.