
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X175-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X175-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 175 mm travel back by up to 75 mm. This creates a highly versatile 100-175 mm usable travel window, letting you dial in the exact end position during commissioning without swapping out the barrel or adding external stops. It features a carbon steel piston rod and a PT tapered port thread for a reliable, sealed pneumatic connection.
The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE solid-state switches if you decide to add position sensing later. The rear adjuster acts purely as a mechanical stop to set the retract position and does not lock the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X175-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adjust the 100-175 mm travel window to accommodate different package lengths on a single conveyor line without disassembling the cylinder.
Use the rear adjuster screw to set precise retract distances for multi-format machining operations, relying on the 16 mm rod to handle the transfer.
The massive 75 mm adjustment range on this 175 mm stroke is ideal for packaging lines or automated machinery that undergoes frequent product-size changeovers, allowing operators to reposition the retract endpoint on the fly rather than maintaining an inventory of multiple fixed-stroke SAI cylinders.
Because the nominal stroke is 175 mm, the 16 mm diameter rod and M12x1.25 rod thread provide sufficient rigidity, though any long unsupported travel still requires an external guide to prevent side-loading damage. If your process demands that the load stays held in place during a complete air pressure loss, note that this standard SAIJ cannot do so; you would need to specify a SAIL pneumatic lock or BSAI clamp-lock cylinder instead. For ISO 15552 dimensional interchangeability, match the 40 mm bore, 175 mm stroke, PT port thread, and your preferred mounting accessory from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 879 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 175 mm nominal stroke by up to 75 mm, providing a usable travel window of 100-175 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.