
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X180-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 180mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X180-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering 628 Newtons of push force at 0.5 MPa. Fitted with a carbon steel rod and PT tapered ports, it provides a highly flexible 80 to 180 mm usable travel window by trimming up to 100 mm from the 180 mm nominal stroke. This wide adjustment band is ideal for prototypes or machines that frequently process varying part sizes.
Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The rear stopper screw lets you dial in the exact retract end-position during commissioning without installing external stops, though it acts only as a travel limiter and never as a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X180-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure retract distances on packaging lines when switching between different product sizes, using the 100 mm adjustment window to avoid swapping cylinders.
Fine-tune the exact end-of-stroke position during initial commissioning to perfect seating or clamping pressure without adding bulky external mechanical stops.
Control the ejection length of parts from a machining center, dialing the stroke back from 180 mm to as little as 80 mm based on the specific workpiece geometry.
Select this 40 mm bore cylinder when an application requires a variable end-stop rather than a fixed-stroke SAI unit, allowing you to fine-tune the retract distance on the fly. For any load-holding requirements without live air pressure, integrate an external pilot-operated check valve or switch to an AirTAC SAIL or BSAI locking cylinder.
To match this exact ISO 15552 dimensionally interchangeable cylinder, specify a 40 mm bore, 180 mm stroke, 100 mm adjustment range, PT port threads, and the -S magnet option. It operates at speeds from 30 to 800 mm/s and uses the standard SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.5 MPa operating pressure, this 40 mm bore cylinder provides 628 Newtons of push force and 528 Newtons of pull force. It can reach up to 1130 Newtons of push force at 0.9 MPa.
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 100 mm from the 180 mm nominal length, creating an 80 to 180 mm travel window. This stopper limits the retract stroke but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.