
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X180-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 180mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X180-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 170-180mm, allowing precise end-position tuning without adding external stops.
This 40mm bore unit utilizes a G1/4 port and a 16mm carbon steel rod to handle moderate side loads effectively. The extruded aluminum barrel includes sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X180-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 170-180mm retract distance during machine commissioning to perfect part ejection without machining new hard stops.
Quickly adjust the stroke by up to 10mm on packaging lines when switching between slightly different product lengths.
Leverage the -S magnet alongside DMSE electronic sensors to verify and set exact switching points within the adjustable travel window.
The 10mm adjustable stroke is chosen for exact product changeover tuning at commissioning, offering more setup flexibility than a fixed-stroke SAI cylinder. Ensure the PT port thread and 180mm stroke match your system requirements.
Remember that the rear adjuster functions strictly as a travel stop, not a locking device; it cannot hold a load without live air pressure. For applications requiring true load-holding without continuous pneumatic pressure, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve. The standard carbon steel rod is suitable for general industrial environments.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 180mm nominal stroke by up to 10mm. This creates a 170-180mm usable travel window for fine-tuning, though it does not lock the position without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.