
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X185-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X185-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a broad usable travel window of 85-185 mm, allowing you to dial back the nominal 185 mm stroke by up to 100 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible CMSE or DMSE switch mounting.
Unlike fixed-stroke SAI units, this model lets you fine-tune the retract end-position without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and works with the built-in variable air cushions to decelerate the load; it does not hold the load without live air pressure. For position holding, consider SAIL or BSAI series cylinders. The 16 mm carbon steel rod and M12x1.25 thread handle moderate side loads, while the PT G1/4 port ensures reliable airflow.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 85 to 185 mm when switching product sizes on a packaging line, avoiding the need to physically swap out the cylinder.
Fine-tune the final end-position during machine commissioning without adding external mechanical stops or shims to the fixture.
Set the stroke back by a specific amount to accommodate varying part lengths in automated clamping and pressing operations.
Choose this 40 mm bore cylinder when your application requires an exact retract position that might vary slightly between tooling setups, stepping down from a 50 mm bore (982 N at 0.5 MPa) if your force needs are lower, or up to a 63 mm bore (1559 N) for heavier loads. The 100 mm adjustment range is ideal for product-size changeovers on a line, providing a wide 85-185 mm window. When replacing an ISO 15552 cylinder, match the 40 mm bore, 185 mm stroke, 100 mm adjuster, PT G1/4 port, and standard carbon steel rod. Because the stroke is 185 mm, ensure external guiding if the load is heavy or unsupported to prevent rod bending. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 185 mm down to 85 mm, creating a wide 100 mm tuning window. It sets the travel end and decelerates the load but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.