verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X185-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke185 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20

The AirTAC SAIJ40X185-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 165-185 mm usable travel window, allowing you to dial back the nominal 185 mm stroke by up to 20 mm during commissioning.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It uses a PT tapered port thread and a standard carbon steel piston rod. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without requiring external stops or cylinder swaps.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X185-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20 Is Used

tune

End-Position Tuning

Dial in the exact 165 to 185 mm end-stop during machine commissioning without physically swapping cylinders or adding external mechanical stops.

settings_input_component

Product Changeover

Quickly adjust the retract distance on packaging lines when handling slightly different product sizes that require varied stroke lengths.

conveyor_belt

Conveyor Diverter Setup

Fine-tune the actuation reach of a diverter arm to accommodate varying package widths on the fly using the rear adjustment screw.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20 the Right Cylinder?

The adjustable stroke is ideal for product changeovers or fine-tuning end positions on the fly. For a direct ISO 15552 replacement, match the 40 mm bore, 185 mm stroke, 20 mm adjustment, PT port, and standard carbon steel rod. Since this is a non-magnetic variant, add an -S suffix if you require CMSE reed or DMSE electronic sensors.

Because the stroke is 185 mm, evaluate the side-load conditions carefully. While the 16 mm rod and M12x1.25 thread handle moderate loads well, long unsupported travel still requires an external guide. Remember that the rear adjuster is a travel stop, not a lock; it cannot hold a load without live air. For true load-holding, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20 FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 165 to 185 mm, letting you fine-tune the retract end position at commissioning without changing the cylinder.

At 0.7 MPa, the push force increases to 879 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X185-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.