
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X185-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X185-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel. With a nominal 185 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 155-185 mm.
The adjuster functions strictly as a mechanical stop to set the retract end position and relies on the integrated air cushions for deceleration. It does not lock or hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod with an M12x1.25 thread handles side loads effectively.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 155-185 mm travel window during line changeovers to accommodate different product sizes without physically replacing the cylinder.
Use the 30 mm rear adjuster to fine-tune the retract stop during commissioning, ensuring precise mechanical alignment without adding external stops.
Choose this adjustable-stroke model when you need precise end-position tuning during commissioning or product changeovers without swapping out the entire cylinder. If you need more power, moving up to a 50 mm bore provides 982 N.
For load-holding without continuous air pressure, this cylinder is insufficient as the rear adjuster is only a travel stop. Consider the SAIL or BSAI series instead. This SKU features a PT tapered port thread, a standard carbon steel rod, and no integrated magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
The cylinder has a nominal stroke of 185 mm with a 30 mm adjustment range, allowing you to set the effective travel anywhere between 155 mm and 185 mm using the rear stopper.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.