
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X185-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X185-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
Equipped with a magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position detection. The PT tapered port threads and carbon steel rod offer durable performance, while the rear stopper allows quick mechanical fine-tuning during machine setup or product changeovers.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract distance by up to 50mm when switching between product sizes on a packaging line, avoiding cylinder swaps.
Dial in the exact 135-185mm travel window during commissioning to perfectly seat parts without adding external mechanical stops.
Leverage the integrated magnet with CMSE or DMSE switches to confirm adjustable end positions in automated assembly processes.
If you need greater thrust, stepping up to the 50mm bore yields 982N. Select the SAIJ adjustable version over a fixed SAI cylinder when commissioning requires variable end-stops or product-size changeovers. Remember that the rear adjuster acts only as a travel stop, not a lock; the cylinder cannot hold a load without live air. For dead-load holding, consider an external rod lock or the AirTAC SAIL series.
This model is dimensionally interchangeable per ISO 15552. To match this replacement exactly, verify the 185mm nominal stroke, 50mm adjustment range, PT G1/4 port, and the -S magnet option. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke by up to 50mm. This creates a usable travel window of 135-185mm, which is ideal for fine-tuning end positions during setup. It is not a locking device.
At 0.7MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.