
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X185-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X185-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 110-185mm, allowing you to dial back the 185mm nominal stroke by up to 75mm during commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when tuning end positions. It shares the extruded aluminum barrel and dual-side sensor grooves of the fixed-stroke SAI series, but omits FB, CA, CB, and CR mounts, utilizing a reduced set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X185-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 110-185mm travel distance during commissioning without adding external physical stops to the fixture.
Quickly adapt end-position limits for different sized parts running on the same conveyor or clamping station.
Fine-tune the approach stroke of a 628N press tool to guarantee accurate alignment before final actuation.
The 75mm adjustment range is ideal for product-size changeovers on a line, acting as a variable end-stop. Because the rear adjuster and air cushions only decelerate the load, a plain SAIJ will not hold position without live air; for true load-holding, select the SAIL or BSAI series. To match this ISO 15552 footprint, specify: 40mm bore, 185mm stroke, 75mm adjustment, PT G1/4 port, carbon steel rod, and no magnet.
Quick checklist
The rear adjuster acts as a travel stop, allowing you to shorten the effective stroke from 185mm down to 110mm. It does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.