
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X190-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 190mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X190-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This creates a highly flexible usable window of 90 to 190 mm, letting you dial in the exact end position during commissioning without swapping out the barrel or adding external stops.
This model uses PT tapered port threads (G1/8) and relies on variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop, meaning it will not hold the load in place without live air pressure. For position holding without continuous pressure, you would need a separate SAIL or BSAI locking cylinder. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE or DMSE switches if a magnet is specified later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adjust the 90-190 mm travel window during product format changes to set new end positions without disassembling the pneumatic circuit.
Dial in the exact clamping or ejection distance on an assembly line, using the rear screw to fine-tune the final position within a 100 mm range.
Safely set the precise mechanical stop during initial machine setup to prevent overtravel, protecting delicate tooling from impact damage.
The massive 100 mm adjustment range is ideal for machines handling frequent product-size changeovers, allowing operators to reconfigure the end stop on the fly rather than maintaining an inventory of fixed-stroke SAI cylinders.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 190 mm stroke, PT port thread, and the chosen mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the 190 mm stroke is substantial for this bore size, ensure your setup includes an external guide to support the rod and prevent excessive side-loading on the piston.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 879 N.
The nominal stroke is 190 mm, but the external rear adjuster screw can be extended inward to shorten the travel by up to 100 mm. This provides a usable stroke window of 90 to 190 mm, allowing you to set the exact end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.