verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X190-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 190mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke190 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20

The AirTAC SAIJ40X190-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. It provides a usable travel window of 170 to 190 mm, letting you dial back the nominal 190 mm stroke by up to 20 mm during commissioning.

This extruded aluminum profile barrel omits tie-rod construction and utilizes a PT tapered G1/4 port. The carbon steel piston rod features an M12x1.25 thread, and the unit includes adjustable air cushions at both ends to absorb impacts. It supports a standard mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X190-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20 Is Used

tune

Machine Changeover

Quickly adjust the 170-190 mm travel window during product size changes on a packaging line without replacing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end position at commissioning to clear mechanical hard stops and optimize tooling clearance.

factory

Variable End Stops

Set precise deceleration points for varying material lengths using the rear stopper combined with the built-in air cushion.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20 the Right Cylinder?

Select this 40 mm bore cylinder when an application requires precise end-position tuning without adding external stops or swapping the cylinder. The rear adjuster acts strictly as a travel stop to set deceleration, not a lock, so it will not hold the load without live air pressure. For secure load holding, consider the SAIL or BSAI series.

Because the stroke is under 300 mm, side-load risks remain manageable, but long unsupported strokes still require an external guide. This model is dimensionally interchangeable per ISO 15552 mounting interfaces, featuring a PT port thread and no standard magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw lets you shorten the effective stroke from 190 mm down to 170 mm. This creates a 20 mm usable travel window for fine-tuning the end position without swapping cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X190-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X190-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.