
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X195-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 195mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X195-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that permits a usable travel window of 95 to 195 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch placement.
This model features a carbon steel piston rod with an M12x1.25 thread and PT tapered port threads. The rear adjuster acts purely as a mechanical stop to set the retract end position; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stroke from 95 to 195 mm during product family changeovers, eliminating the need to physically swap cylinders or add external stopper blocks.
Fine-tune the final resting position of tooling at commissioning, using the rear screw to perfectly align parts without reprogramming machine motion controllers.
Choose this 40 mm bore cylinder when your setup demands a highly variable end-stop, offering a 100 mm adjustment range on a 195 mm nominal stroke. If your application requires less thrust, stepping down to a 32 mm bore yields 563 N at 0.7 MPa, whereas a 50 mm bore provides 1374 N for heavier loads. The generous 100 mm trim range makes it ideal for product changeovers on shared machinery.
As a dimensionally interchangeable ISO 15552 cylinder, it replaces units with a 40 mm bore, 195 mm stroke, 100 mm adjustment, PT port, and no magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the nominal stroke is under 300 mm, side-load risks are moderate, but external guides remain recommended for offset loads.
Quick checklist
It operates at speeds ranging from 30 to 800 mm/s.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from 195 mm down to as little as 95 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.