verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X195-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 195mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke195 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20

The AirTAC SAIJ40X195-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 175-195 mm usable travel window, allowing you to dial back the 195 mm nominal stroke by up to 20 mm during machine commissioning.

This extruded aluminum barrel integrates dual-side sensor grooves for CMSE or DMSE switches. The M12x1.25 carbon steel rod and PT G1/4 port handle standard side loads, while the rear stopper sets the retract end-position without holding the load pneumatically.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X195-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke195 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×195Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20 Is Used

tune

Machine Commissioning

Fine-tune the 175-195 mm travel window during setup to hit exact end-of-stroke positions without machining external stopper blocks.

settings_input_component

Product Changeover

Quickly adjust the retract end-stop by up to 20 mm on packaging lines when handling slightly shorter product lengths.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20 the Right Cylinder?

Select this 40 mm bore when an application requires a 175-195 mm travel window and precise end-position tuning without swapping hardware. Because the 195 mm stroke is under 300 mm, side-load stress is manageable, though long unsupported strokes still need an external guide.

The rear adjuster acts purely as a travel stop, meaning the cylinder will not hold its load without live air pressure. For drop-prevention or load-holding without continuous air, use an external rod lock or explore the SAIL or BSAI series. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and features a PT tapered port thread.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20 FAQ

It features a rear adjusting screw that lets you shorten the effective stroke by up to 20 mm, providing a usable travel window of 175 to 195 mm. This allows precise end-position tuning at commissioning without changing the cylinder or adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X195-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.