
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X195-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 195mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X195-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 30 mm. This creates a precise 165-195 mm usable window, letting you fine-tune the retract end position during commissioning without swapping out the actuator.
Equipped with a 16 mm carbon steel rod and an M12x1.25 thread, this profile cylinder handles standard side loads effectively. The unit uses a PT tapered G1/4 port and includes variable air cushions at both ends to decelerate the load smoothly. It supports the standard SAI sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches if magnetism is required later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X195-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 165-195 mm travel window during product size changes on a packaging line without replacing the actuator.
Fine-tune the retract stroke by up to 30 mm during commissioning to achieve exact clamping or positioning without external stoppers.
Adjust the end stop on the fly for conveyor sorting applications where product lengths vary but space is limited.
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, eliminating the need to bolt on external stops or buy a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external pilot-operated check valve or the SAIL lock cylinder.
To match this ISO 15552 footprint exactly, specify a 40 mm bore, 195 mm stroke, 30 mm adjustment range, PT port thread, and standard carbon steel rod material. The compatible mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. Since the stroke is 195 mm, standard external guiding is recommended for optimal performance.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the 195 mm nominal stroke by up to 30 mm, creating a 165-195 mm usable travel window. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.