
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X20-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 20mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port. By integrating an external adjusting screw, this 40mm bore model allows you to fine-tune the effective travel down to a precise 10-20mm window without swapping out the entire unit.
This adjuster functions purely as a mechanical stop to set the retract end position and relies on the standard variable air cushion for deceleration; it does not lock or hold the load without continuous live air. For load-holding requirements without air pressure, consider an external rod lock or related types like the SAIL or BSAI. The extruded aluminum barrel includes sensor grooves on both sides for straightforward CMSE or DMSE switch integration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10-20mm travel window during machine commissioning to seat delicate components perfectly without adding external physical stops.
Quickly adjust the retract end-stop by up to 10mm when switching between slightly different product sizes on a high-mix assembly line.
The adjustable stroke is ideal for short-travel setups where dialing in a 10-20mm window prevents the need for external stops, unlike a fixed-stroke SAI cylinder. To match this ISO 15552 footprint exactly, confirm the 20mm stroke, 10mm adjustment, PT port, and standard carbon rod. Because the travel is only 20mm, external side-load guides are generally unnecessary, but always ensure the mountings used belong to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The rear adjusting screw acts as a mechanical stop, allowing you to trim the effective travel from the nominal 20mm down to as little as 10mm. This creates a 10-20mm usable travel window for fine-tuning the end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.