
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X20-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 20mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port. Because this specific SKU carries a 10mm adjustment code on a 20mm nominal stroke, you gain a highly precise 10-20mm usable travel window for exact end-position tuning.
This adjustable-stroke design allows you to dial in the retract position at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for seamless position feedback.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10-20mm travel needed to seat delicate electronic components without applying excessive force, tweaking the rear stopper during initial machine setup.
Quickly adapt end-stops on a packaging line when switching to a slightly different product size, using the 10mm adjustment window instead of changing hardware.
The rear adjuster acts purely as a mechanical stop to fine-tune the travel end; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider an external rod lock or related types like the SAIL or BSAI.
When matching this cylinder for an ISO 15552 replacement, verify the 20mm stroke, 10mm adjustment range, PT port thread, and the required mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR options.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 10mm. Since the nominal stroke is 20mm, this creates a usable travel window of 10-20mm, letting you fine-tune the end position without external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.