verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X20-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 20mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke20 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$64.17 $71.67Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20

The AirTAC SAIJ40X20-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you can fine-tune the effective travel window down from 20mm to a zero stroke, giving you exact end-position control without adding external stops.

This adjustable-stroke variant uses a carbon steel piston rod with an M12x1.25 thread, paired with a PT G1/4 port. It retains the standard extruded aluminum barrel with sensor grooves on both sides, but if you need position feedback, you must specify the -S magnet option to use CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a travel stop to set deceleration and end limits, meaning it will not hold a load safely without continuous live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X20-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke20 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20 Is Used

tune

Precision End-Stop Tuning

Dial in the exact clamping depth on short-stroke assemblies by adjusting the rear stopper from 0 to 20mm during machine commissioning.

settings_input_component

Rapid Product Changeover

Adapt a packaging line to different material thicknesses quickly by tweaking the effective stroke at the rear without swapping out the entire cylinder.

precision_manufacturing

Variable Position Seating

Ensure delicate parts are seated perfectly every time by using the adjustable travel window to absorb minor mechanical tolerances.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20 the Right Cylinder?

The SAIJ40X20-20 is ideal for applications requiring precise mechanical tuning during commissioning or product changeover, replacing the need to swap out a fixed-stroke SAI cylinder. Because the stroke is only 20mm, side-load stress on the rod is minimal, though the load must still be guided. If your process requires the cylinder to hold its position without air pressure, the rear stopper here is not a lock; you should look at the SAIL or BSAI series instead. For a direct ISO 15552 replacement, match the 40mm bore, 20mm stroke, 20mm adjustment, PT G1/4 port, and your desired mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20 FAQ

If you increase the pressure to 0.7 MPa, the push force rises to 879N.

The SAIJ40X20-20 has a 20mm nominal stroke with a 20mm adjustment code. By turning the rear screw, you can shorten the effective travel window all the way down to 0mm, allowing you to fine-tune the end position without changing the cylinder or adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X20-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X20-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.