verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X200-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke200 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10

The AirTAC SAIJ40X200-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 190-200 mm, allowing you to dial back the nominal 200 mm stroke by up to 10 mm during commissioning.

This model incorporates a 16 mm carbon steel rod with an M12x1.25 thread, paired with a PT tapered G1/4 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X200-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10 Is Used

tune

Machine Setup Changeover

Fine-tune the 190-200 mm retract end-stop during product size changes on a packaging line, ensuring precise positioning without physically swapping the actuator.

precision_manufacturing

Variable End-Stop Positioning

Dial in the exact retraction point within the 10 mm window during machine commissioning to compensate for mechanical tolerance stack-up in tooling.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10 the Right Cylinder?

If your process needs more thrust, stepping up to the 50 mm bore yields 982 N at the same pressure. Choose the adjustable SAIJ over a fixed SAI when you need to trim the retract end-stop for product changeovers without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an external rod lock or the SAIL series.

For a 200 mm stroke, the 16 mm rod handles standard side loads adequately, but any long unsupported travel exceeding 300 mm still requires an external guide to prevent rod binding. This SAIJ40X200-10 configuration uses PT tapered ports and lacks a standard magnet, so it operates without integrated position sensing unless specified otherwise. It is dimensionally interchangeable per ISO 15552 mounting-interface dimensions.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10 FAQ

At the maximum pressure of 1.0 MPa, it delivers up to 128 kgf.

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 200 mm down to 190 mm. It only sets the travel end and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X200-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.