
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X200-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X200-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 100-200mm usable travel window. This configuration allows you to dial back the nominal 200mm stroke by up to 100mm during commissioning without swapping the cylinder.
The rear screw acts as a travel stop to fine-tune the retract end position, but it does not lock the load without live air. For load-holding without pressure, consider an external rod lock or the SAIL series. This profile cylinder accepts a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 100-200mm travel window for different product sizes without replacing the cylinder or adding external mechanical stops.
Fine-tune the retract end position during machine setup to achieve precise alignment, using the rear screw to trim up to 100mm off the nominal stroke.
Handle diverse part lengths on a single conveyor line by adjusting the stroke on the fly to meet changing routing requirements.
An adjustable stroke is ideal for product-size changeovers on a line, letting you set variable end-stops on the fly rather than machining external stops or buying a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 40mm bore, 200mm stroke, 100mm adjustment range, PT port thread, and mounting style. Since this unit lacks the -S magnet option, it cannot host CMSE or DMSE sensors. With a 200mm stroke, the 16mm rod handles standard loads, but ensure external guiding if side loads are present.
Quick checklist
At 0.7MPa, the push force increases to 879N.
The rear adjuster screw lets you shorten the effective travel from its 200mm nominal stroke down to 100mm. It functions as a physical stop to set the end position and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.