
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X200-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X200-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 180-200 mm, letting you dial back the 200 mm nominal stroke by up to 20 mm during commissioning. It uses a G1/4 port and a 16 mm carbon steel rod.
This adjustable model omits the FB, CA, CB, and CR mounts, offering a reduced footprint set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts strictly as a mechanical stop to fine-tune the end position without adding external stops; it does not hold the load without live air. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 180-200 mm end-stop during commissioning to perfect product spacing without swapping cylinders.
Quickly adjust the retract position by up to 20 mm on automated lines handling varying material lengths.
Use the rear screw to fine-tune the travel limit for precise clamping or forming tasks on the fly.
Choose this 40 mm bore adjustable cylinder when you need precise end-position tuning on a 200 mm stroke. Conversely, stepping up to the 50 mm bore provides 982 N. The SAIJ40X200-20 is selected over a fixed SAI cylinder when machine setups involve product changeovers or require variable end-stops. It operates at speeds of 30-800 mm/s. To match this ISO 15552 footprint, specify the 40 mm bore, 200 mm stroke, 20 mm adjustment, PT port thread, and your preferred mounting option. Since the stroke is 200 mm, ensure adequate guiding for any side loads.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster allows you to shorten the 200 mm nominal stroke by up to 20 mm, creating a 180-200 mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.