
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X200-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X200-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits up to 40 mm of travel reduction. This yields a usable stroke window of 160 to 200 mm, allowing operators to dial in exact end positions without adding external stops. It features a carbon steel piston rod and a PT tapered port thread. Equipped with a magnet (-S), it integrates smoothly with AirTAC CMSE reed and DMSE solid-state sensors via the dual-side sensor grooves on the extruded aluminum barrel.
The rear adjuster acts purely as a travel stop to set the retract position; it does not hold the load without live air pressure. For applications requiring true pneumatic load-holding, the SAIL or BSAI series is recommended.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 160-200 mm stroke window during format changes on packaging lines, eliminating the need to physically swap cylinders for different carton sizes.
Fine-tune the retract end position during machine commissioning using the rear adjuster, ensuring precise mechanical alignment without external shims.
Vary the travel distance on automated assembly stations to accommodate part height variations while maintaining 879 N of clamping force at 0.7 MPa.
The 40 mm adjustment range is chosen when a machine requires significant product changeover flexibility, letting technicians trim the 200 mm nominal stroke down to 160 mm on the fly instead of swapping out a fixed-stroke SAI cylinder. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, deliberately omitting FB, CA, CB, and CR styles.
Because the 200 mm stroke approaches the mid-range of the 1200 mm maximum for this bore, the 16 mm diameter rod and M12x1.25 thread handle moderate side loads well. However, any long unsupported stroke still requires an external guide to prevent rod binding. To match this ISO 15552 cylinder for replacement, verify the 40 mm bore, 200 mm stroke, 40 mm adjuster, PT G1/4 port, and -S magnet specification.
Quick checklist
The maximum thrust is 128 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that can shorten the 200 mm nominal stroke by up to 40 mm, providing an effective travel window of 160 to 200 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.