
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-10 is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster. It provides a nominal 210 mm stroke that can be dialed back by up to 10 mm, creating a precise 200-210 mm usable travel window. This built-in adjustability allows you to fine-tune the retract end position at commissioning without adding external stops.
This model features a 16 mm carbon steel rod and a G1/4 PT port. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options to streamline the adjustable rear assembly.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 200-210 mm retract position during machine setup to perfect product seating without swapping cylinders.
Quickly adjust the travel window on a packaging line to accommodate slight variations in incoming material lengths.
Fine-tune the final approach distance on a 628 N press fit station to prevent component damage during commissioning.
An adjustable stroke is preferred over a fixed SAI cylinder when a machine requires variable end-stops or precise product changeover tuning. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, select an SAIL air-released lock, a BSAI clamp-lock, or an external rod lock. Because the 210 mm stroke exceeds 300 mm? No, at 210 mm a side-load guide is less critical, but long unsupported strokes still need an external guide.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw acts as a mechanical stop that shortens the nominal 210 mm stroke by up to 10 mm, giving a usable travel window of 200-210 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.