
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 110 to 210 mm, allowing you to dial back the nominal stroke by up to 100 mm during machine setup.
This adjustable-stroke design eliminates the need to swap out the entire cylinder or bolt on external stops when product sizes change. The rear adjuster functions strictly as a travel stop for end-position tuning, not a load-holding lock. For position retention without live air pressure, consider the related SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 110 to 210 mm travel distance during commissioning to accommodate multiple product sizes on a single conveyor line.
Quickly fine-tune the retract position for new tooling setups without removing the cylinder or fabricating custom spacer blocks.
Use the 100 mm adjustment range to safely trim the stroke back from the maximum 210 mm, preventing mechanical interference at the end of travel.
Choose this 40 mm bore when you need precise retract-end tuning without adding external physical stops. If your application requires less force, the 32 mm bore offers 402 N at 0.5 MPa, while the 50 mm bore provides 982 N for heavier loads. Because the 210 mm stroke exceeds 300 mm is not met here, standard mounting guidance applies, though long unsupported strokes still benefit from an external guide.
The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. This model features a PT tapered port thread and no magnet; add the -S suffix if you require CMSE reed or DMSE electronic solid-state sensors.
Quick checklist
At the maximum 1.0 MPa, it can deliver up to 128 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 210 mm nominal stroke down to as little as 110 mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.