verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke210 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S

The AirTAC SAIJ40X210-100-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 110 to 210 mm, allowing you to dial back the 210 mm nominal stroke by up to 100 mm during commissioning.

This unit includes a piston magnet for position sensing with AirTAC CMSE reed and DMSE electronic sensors. It uses a G1/4 port with a tapered PT thread option and a 16 mm carbon steel rod with an M12x1.25 thread. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S Is Used

settings_input_component

Machine Changeover

Dial in the exact 110 to 210 mm end position during product size transitions without adding external stops or changing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract distance at commissioning to perfect the timing of a pressing or indexing operation.

factory

Adjustable Assembly Stops

Provide a variable mechanical stop for an assembly station that processes multiple part lengths on the same line.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S the Right Cylinder?

Choose this 40 mm bore adjustable-stroke cylinder when your machine setup requires variable end stops or frequent product changeovers without swapping out the physical cylinder. If your application needs less force, the 32 mm bore offers 345 N of pull at 0.5 MPa; for higher loads, the 50 mm bore provides 825 N of pull. Because the nominal stroke is 210 mm, an external guide is recommended to manage side loads on the extended rod.

The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the integrated air cushions for deceleration. It does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series instead. To match this exact ISO 15552 interchangeable footprint, specify a 40 mm bore, 210 mm stroke, 100 mm adjustment, PT port, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S FAQ

At 0.9 MPa, the push force increases to 1130 N.

The rear adjuster screw lets you mechanically shorten the effective travel from the 210 mm nominal stroke down to 110 mm, creating a 110-210 mm usable window. It functions as a travel stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X210-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.