
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw, you can trim the nominal 210mm travel back by up to 30mm, creating a precise 180-210mm usable window for exact end-position tuning at commissioning. This eliminates the need to swap out the entire cylinder or bolt on external stops when aligning tooling.
This 40mm bore profile cylinder features a PT tapered port thread and a 16mm carbon steel piston rod. The adjustable screw acts purely as a travel stop to set the retract endpoint, not as a lock, meaning live air pressure is required to hold the load. It supports a standard speed range of 30-800 mm/s and utilizes variable air cushions at both ends to manage deceleration across the 210mm stroke.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 180-210mm stroke window during product family changeovers to perfectly seat new grippers or tooling without machining new hard stops.
Adjust the retract position on the fly for conveyor diverters or pushers that must handle different package lengths on the same line.
Fine-tune the final end position during commissioning to achieve precise mechanical alignment, avoiding the cost of ordering custom-length cylinders.
Choose this 40mm adjustable-stroke unit when your setup requires on-the-fly end-position tuning within a 180-210mm travel window, rather than committing to a fixed 210mm SAI cylinder. Because the 210mm stroke is relatively long, ensure you provide an external guide to support the load and prevent excessive side-loading on the 16mm rod.
For a direct ISO 15552 replacement match, specify the 40mm bore, 210mm stroke, 30mm adjustment, PT port thread, and your required mounting style. SAIJ supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. Note that this unit lacks a magnet; if you need position sensing, you must select the -S option for CMSE reed or DMSE electronic sensors. If you need true load-holding without live air pressure, this stopper cylinder will not suffice and you should look toward the SAIL or BSAI locking cylinders.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 210mm down to as little as 180mm. It acts as a mechanical stop to set the end position, but it is not a lock and cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.