
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear adjustment screw, you can shorten the effective travel, creating a usable stroke window of 180-210 mm for this specific SKU. This allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops.
This 40mm bore model includes a magnet (-S) for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches housed in the dual-side sensor grooves. It uses a G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread. The adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 180-210mm window when switching product sizes on a packaging line, eliminating the need for physical spacer blocks.
Fine-tune the final resting position during commissioning to align a tooling fixture perfectly, compensating for mechanical tolerance stack-up without changing the cylinder.
Adjust the effective stroke dynamically for multi-format processes, using the rear stopper screw to set distinct travel limits for different operational recipes.
Choose this adjustable-stroke model when your machine setup requires variable end stops or frequent product-size changeovers. Unlike a fixed-stroke SAI cylinder, the 30mm adjustment window lets you dial in the exact retract distance on the fly.
This cylinder is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It features PT tapered ports and a 16mm rod. Because the 210mm stroke is relatively long, ensure adequate external guiding to prevent excessive side-loading on the rod and front cap.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to shorten the nominal 210mm stroke by up to 30mm, providing a usable travel window of 180-210mm. The adjuster functions as a mechanical stop to set the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.