
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel anywhere within a 160 to 210 mm window. The carbon steel piston rod features an M12x1.25 thread, providing a robust interface for your mounting attachments.
This adjustable-stroke model uses a PT tapered port thread and operates at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches if needed. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 160-210 mm travel window during format size changes on a packaging line, avoiding the need to physically swap out cylinders for different product lengths.
Fine-tune the retract stop during machine commissioning to perfectly align a 40 mm bore actuator without machining custom external spacers.
Control the ejection stroke of parts on an assembly conveyor, using the 50 mm adjustment to accommodate varying component widths on the fly.
The 50 mm rear adjustment screw lets you dial in the exact retraction point at commissioning without adding external stops. If you need to hold a load without live air pressure, note that this adjuster acts only as a travel stop and not a lock; you should consider an external pilot-operated check valve or the SAIL lock cylinder series instead.
Because this unit has a 210 mm stroke, ensure adequate external guidance to prevent excessive side-loading on the rod. To match this exact ISO 15552 replacement, verify the 40 mm bore, 210 mm nominal stroke, 50 mm adjustment range, PT port thread, and your required mounting bracket.
Quick checklist
If you increase the operating pressure to 0.9 MPa, the push force reaches 1130 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 210 mm nominal stroke down to 160 mm. This stop only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.