
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 210 mm stroke that can be dialed back by up to 75 mm, giving you a usable travel window between 135 and 210 mm.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The carbon steel piston rod features an M12x1.25 thread, and the body uses PT tapered port threads. The rear adjuster acts purely as a mechanical stop to fine-tune the end position and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop position during product size changes on a packaging line without replacing the cylinder.
Fine-tune the retract travel window from 135 to 210 mm during initial setup to perfect machine timing.
Adjust the stroke on the fly for flexible positioning tasks that require precise end-position limits.
Choose this adjustable-stroke model over a fixed SAI cylinder when your application requires commissioning fine-tuning or variable end-stops without physically swapping the cylinder or adding external stops. If your machine changeover frequently shifts the required travel within that 135-210 mm window, this rear screw stopper saves setup time.
Because the stroke here is 210 mm, ensure proper external guiding to prevent excessive side loads on the M12x1.25 rod. If you need true load-holding without live pressure, this cylinder is not a lock; consider the SAIL or BSAI series instead. It is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The SAIJ40X210-75 has a nominal 210 mm stroke with a rear mechanical adjuster that allows you to trim the travel back by up to 75 mm. This creates a usable travel window of 135 to 210 mm. The adjuster is a stop only and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.