
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X210-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide tuning band allows operators to dial in the exact retract end-position during commissioning without swapping out the cylinder.
Fitted with a PT tapered port thread and an integrated magnet (-S), this 40mm bore unit works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side extruded aluminum barrel grooves. The carbon steel piston rod features an M12x1.25 thread, providing a robust interface for mounting attachments while handling moderate side loads.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance by up to 75mm when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders or reposition hard stops.
Fine-tune the end-of-stroke position during machine setup to achieve exact positioning, absorbing mechanical tolerances without altering the fixed 210mm nominal stroke length.
Provide a flexible retract window of 135 to 210mm for automated assembly equipment where the final resting position must be adjusted on the fly per batch requirements.
Choose this adjustable-stroke model over a fixed SAI cylinder when an application requires frequent product changeovers or precise end-stop tuning without adding external mechanical stops. If your setup needs less force, stepping down to a 32mm bore yields 402N at 0.5 MPa; stepping up to a 50mm bore provides 982N. Since the nominal stroke is 210mm, ensure adequate external guiding for the load to prevent excessive rod side-loading.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 40mm bore, 210mm nominal stroke, 75mm adjustment range, PT port thread, and the -S magnet option. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ does not hold loads without live air, so utilize a SAIL or BSAI cylinder if fail-safe load holding is required. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At a higher pressure of 0.7 MPa, the push force increases to 879N.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its 210mm nominal length down to as little as 135mm. It only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.